Swift Industries - Catalyst Pack Size Guide

Dimensions

Measurements (Width x Height x Length in inches): 11”w x 7”h x 6”d

Capacity (in Liters): 7.5 L

Weight (in Ounces): 15 oz

 

FIT-CHECK

Handlebar width compatibility 

30cm width
Step 1: Measure the spacing of your handlebars, inside-to-inside, at the hoods.

Step 2: If you have integrated shifting, enlist a friend to engage the levers fully into the center space between the bars, and measure the space from tip-to-tip.

Clearance (height) specs for use at the handlebars and on the saddle

You’ll need a minimum of 10” (25.5cm) of space between your bicycle handlebars and the top of your front or rear tire to use the Catalyst Pack without a support or rack. Keep in mind that a weighted down pack may sag into the wheel, and pay attention to avoid abrasion.

With a rack: As little as 6.5″ (16.5cm) of clearance is required to run the Catalyst Pack on the front with a Carradice Universal Bar Rack. Note that the Carradice Bagman Support is not compatible with the Catalyst Pack.